Toyota Grand Highlander (AS10) 2024 Owners Manual / Driving / Using the driving support systems
Toyota Grand Highlander (AS10): Using the driving support systems
- Toyota Safety Sense 3.0 software update
- Toyota Safety Sense 3.0
- Sensors used by Toyota Safety Sense 3.0
- Driver monitor
- PCS (Pre-Collision System)
- LTA (Lane Tracing Assist)
- LCA (Lane Change Assist)
- LDA (Lane Departure Alert)
- PDA (Proactive driving assist)
- FCTA (Front Cross Traffic Alert)
- RSA (Road Sign Assist)
- Dynamic radar cruise control
- Cruise control
- Emergency Driving Stop System
- Traffic Jam Assist
- Stop & Start system
- BSM (Blind Spot Monitor)
- Safe Exit Assist
- Intuitive parking assist
- RCTA (Rear Cross Traffic Alert) function
- RCD (Rear Camera Detection)
- PKSB (Parking Support Brake)
- Parking Support Brake function (static objects front and rear of the vehicle)
- Parking Support Brake function (moving vehicles rear of the vehicle)
- Parking Support Brake function (pedestrians rear of the vehicle)
- Driving mode select switch
- Multi-terrain Select (AWD models)
- Downhill assist control system (AWD vehicles)
- Driving assist systems
Share this page:
Similar pages:
Recalling a driving position
1. Check that the shift position
is in P.
2. Turn the engine switch to
ON.
3. Press one of the buttons for
the driving position you want to recall until the buzzer
sounds.
■To stop the position recall operation
part-way through
Perform any of the following operations:
Press the "SET" button.
...
Front seats
WARNING
■When adjusting the seat position
Take care when adjusting the
seat position to ensure that
other passengers are not
injured by the moving seat.
Do not put your hands under the
seat or near the moving parts to
avoid injury. Fingers or hands
may become jammed in the
seat mechanism ...