Toyota Grand Highlander (AS10): Maintenance requirements

To ensure safe and economical driving, day-to-day care and regular maintenance are essential. It is the owner's responsibility to perform regular checks.

Toyota recommends the following maintenance:

■Repair and replacement

It is recommended that genuine Toyota parts be used for repairs to ensure performance of each system.

If non-Toyota parts are used in replacement or if a repair shop other than a Toyota dealer performs repairs, confirm the warranty coverage.

■Allow inspection and repairs to be performed by a Toyota dealer

  • Toyota technicians are well-trained specialists and are kept up to date with the latest service information. They are well informed about the operation of all systems on your vehicle.
  • Keep a copy of the repair order. It proves that the maintenance that has been performed is under warranty coverage. If any problem should arise while your vehicle is under warranty, your Toyota dealer will promptly take care of it.

WARNING

■If your vehicle is not properly maintained

Improper maintenance could result in serious damage to the vehicle and possible death or serious injury.

■Handling of the battery

  • Engine exhaust, some of its constituents, and a wide variety of automobile components contain or emit chemicals known to the State of California to cause cancer and birth defects and other reproductive harm. Work in a well ventilated area.
  • Oils, fuels and fluids contained in vehicles as well as waste produced by component wear contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Avoid exposure and wash any affected area immediately.
  • Battery posts, terminals and related accessories contain lead and lead compounds which are known to cause brain damage.

    Wash your hands after handling.

General maintenance

General maintenance should be performed on a daily basis. This can be done by yourself or by a Toyota dealer.

Scheduled maintenance

Scheduled maintenance should be performed at specified intervals according to the maintenance schedule.

For details about maintenance items and schedules, refer to the "Scheduled Maintenance Guide" or "Owner's Manual Supplement".

■Resetting the message indicating maintenance is required

After the required maintenance is performed according to the maintenance schedule, please reset the message.

To reset the message, follow the procedure described below:

1. Select multi-information of the multi-information display using the meter control switches and then press .

2. Select "Vehicle Settings" and then press and hold .

3. Select "Scheduled Maintenance" and then press .

4. Select "Yes" and then press .

"Reset Complete" will be displayed on the multi-information display when the reset procedure has been completed.

Do-it-yourself maintenance

You can perform some maintenance procedures by yourself.

Please be aware that do-it-yourself maintenance may affect warranty coverage.

The use of Toyota repair manuals is recommended.

For details about warranty coverage, refer to the separate "Owner's Guide", "Warranty and Service Guide", "Owner's Manual Supplement" or "Warranty Booklet".

    Share this page:

    Similar pages:

    Recalling a driving position
    1. Check that the shift position is in P. 2. Turn the engine switch to ON. 3. Press one of the buttons for the driving position you want to recall until the buzzer sounds. ■To stop the position recall operation part-way through Perform any of the following operations: Press the "SET" button. ...

    Side doors
    The vehicle can be locked and unlocked using the entry function, wireless remote control or door lock switches. Unlocking and locking the doors from the outside ■ Smart key system Carry the electronic key to enable this function. Grip the driver's door handle to unlock the door. Holding the d ...