Toyota Grand Highlander (AS10): Tires
- Checking tires
- Tire rotation
- Registering the position of each wheel
- Setting the tire pressure
- Registering ID codes
- Selecting wheel set
Share this page:
Similar pages:
Recalling a driving position
1. Check that the shift position
is in P.
2. Turn the engine switch to
ON.
3. Press one of the buttons for
the driving position you want to recall until the buzzer
sounds.
■To stop the position recall operation
part-way through
Perform any of the following operations:
Press the "SET" button.
...
Emergency flashers
The emergency flashers are
used to warn other drivers
when the vehicle has to be
stopped on the road due to
a breakdown, etc.
Operating instructions
Press the switch.
All the turn signal lights will flash.
To turn them off, press the switch
once again.
■Emergency flashers
If the emergency fla ...