Toyota Grand Highlander (AS10): Taking out the jack

1. Remove the center deck board.

2. Take out the jack.

Disengage the tightening strap.

Taking out the spare tire

Taking out the spare tire

1. Remove the center deck board.

2. Removing the cover

Disengage the 7 claws and pull the side deck board to remove it.

3. Disengage the 5 claws and

3. Disengage the 5 claws and pull the cover to remove it.

4. Remove the center deck

4. Remove the center deck under tray.

5. Loosen the center fastener

5. Loosen the center fastener that secures the compact spare tire.

WARNING

WARNING

■When storing the compact spare tire

Be careful not to catch fingers or other body parts between the spare tire and the body of the vehicle.

    Share this page:

    Similar pages:

    RCTA (Rear Cross Traffic Alert) function
    The RCTA function uses the BSM rear side radar sensors installed behind the rear bumper. This function is intended to assist the driver in checking areas that are not easily visible when backing up. WARNING ■Cautions regarding the use of the system The driver is solely responsible for safe driving ...

    If a warning message is displayed
    The multi-information display shows warnings for system malfunctions and incorrectly performed operations, and messages that indicate a need for maintenance. When a message is displayed, perform the appropriate corrective action for the message. Additionally, if a warning light comes on or flashes ...