Toyota Grand Highlander (AS10): Steering wheel
Adjustment procedure
1. Hold the steering wheel and push the lever down.
2. Adjust to the ideal position by moving the steering wheel horizontally and vertically.
After adjustment, pull the lever up to secure the steering wheel.
WARNING
■Caution while driving
Do not adjust the steering wheel while driving.
Doing so may cause the driver to mishandle the vehicle and cause an accident, resulting in death or serious injury.
■After adjusting the steering wheel
Make sure that the steering wheel is securely locked.
Otherwise, the steering wheel may move suddenly, possibly causing an accident, and resulting in death or serious injury. Also, the horn may not sound if the steering wheel is not securely locked.
Sounding the horn
Press on or close to the 
mark.
Similar pages:
Adding engine oil
■ Checking the oil type and
preparing the item needed
Make sure to check the oil type
and prepare the items needed
before adding oil.
Engine oil selection
Oil quantity (Low level mark
→ Refill upper limit mark)
1.6 qt. (1.5 L, 1.3 Imp. qt.)
Item
Clean funnel
■ Adding engine oil
If the ...
Replacing a flat tire
1. Chock the tires.
2. Using a wheel nut wrench,
slightly loosen the wheel nuts
(approximately one turn).
Vehicles with wheel locks: Use the
wheel lock key to loosen the wheel lock.
3. Turn the tire jack portion A
by hand until the notch of the
jack is in contact with the jack
point.
The jack p ...