Toyota Grand Highlander (AS10): Meter display
■ Locations of gauges and meters
2-dial type
The units used on the meters may differ depending on the target region.
- Tachometer
Displays the engine speed in revolutions per minute - Outside temperature
Displays the outside temperature within the range of -40ºF (-40ºC) to 141ºF (60ºC) - Speedometer
- Clock
- Speedometer
- Engine coolant temperature gauge Displays the engine coolant temperature
- Odometer and trip meter display
- Multi-information display Presents the driver with a variety of vehicle data Displays warning messages if a malfunction occurs
- Shift position and gear position indicator
- Fuel gauge
Displays the quantity of fuel remaining in the tank - Driving range
Displays driving range with remaining fuel.
1-dial display
The units used on the meters may differ depending on the target region.
- Multi-information display Presents the driver with a variety of vehicle data Displays warning messages if a malfunction occurs
- Outside temperature
Displays the outside temperature within the range of -40ºF (-40ºC) to 141ºF (60ºC) - Speedometer/Tachometer Tachometer: Displays the engine speed in revolutions per minute This setting can be changed on the setting screen.
- Clock
- Engine coolant temperature gauge Displays the engine coolant temperature
- Odometer and trip meter display
- Speedometer
- Shift position and gear position indicator
- Fuel gauge
Displays the quantity of fuel remaining in the tank - Driving range
Displays driving range with remaining fuel.
Non-dial display
The units used on the meters may differ depending on the target region.
- Multi-information display Presents the driver with a variety of vehicle data Displays warning messages if a malfunction occurs
- Outside temperature
Displays the outside temperature within the range of -40ºF (-40ºC) to 141ºF (60ºC) - Speedometer
- Clock
- Engine coolant temperature gauge Displays the engine coolant temperature
- Odometer and trip meter display
- Shift position indicator and gear position indicator
- Fuel gauge
Displays the quantity of fuel remaining in the tank - Driving range
Displays driving range with remaining fuel.
■Outside temperature display
- In the following situations, the correct
outside temperature may not
be displayed, or the display may
take longer than normal to
change:
- When stopped, or driving at low speeds (less than 12 mph [20 km/h] )
- When the outside temperature has changed suddenly (at the entrance/exit of a garage, tunnel, etc.)
- When "--" or "E" is displayed, the system may be malfunctioning.
Take your vehicle to your Toyota dealer.
■Driving range
- Use the displayed values as a reference only.
- This distance is computed based
on your average fuel consumption.
As a result, the actual distance that can be driven may differ from that displayed.
- When only a small amount of fuel is added to the tank, the display may not be updated. When refueling, turn the engine switch off. If the vehicle is refueled without turning the engine switch off, the display may not be updated.
■Free/Open Source Software Information
This product contains Free/Open Source Software (FOSS). The license information and/or the source code of such FOSS can be found at the following URL.
■Customization
The gauges and meters can be customized in of the multi-information display.
WARNING
■The information display at low temperatures
Allow the interior of the vehicle to warm up before using the liquid crystal information display. At extremely low temperatures, the information display monitor may respond slowly, and display changes may be delayed.
For example, there is a lag between the driver's shifting and the new gear number appearing on the display. This lag could cause the driver to downshift again, causing rapid and excessive engine braking and possibly an accident resulting in death or injury.
NOTICE
■To prevent damage to the engine and its components
- Do not let the indicator needle of the tachometer enter the red zone, which indicates the maximum engine speed.
- The engine may be overheating if the engine coolant temperature gauge is in the red zone (H). In this case, immediately stop the vehicle in a safe place, and check the engine after it has cooled completely.
Similar pages:
Cleaning the Digital Rearview
Mirror
■ Cleaning the mirror surface
If the mirror surface is dirty, the
image on the display may be difficult
to see. Clean the mirror
surface gently using a soft dry
cloth.
■The camera
The camera for the Digital
Rear-view Mirror is located as
shown.
NOTICE
■To prevent the camera from
malfunctionin ...
Rear seats
The seat position and seatback
angle can be adjusted,
and the seatback can be
folded by operating a seatback
angle adjustment
lever.
WARNING
■Seat adjustment
To reduce the risk of sliding
under the lap belt during a collision,
do not recline the seat
more than necessary.
If the seat is too r ...